Product Description
Project Report on Electronic Energy Meter And Flasher
Electronic Energy Meter And Flasher
Energy meter is a Devices which is precisely used in the Distribution of current and voltage from main line to the consumer ends domestic as well as Industrial and it is installed in between the Distribution line. In regard to Energy Electronic Meter the vital considerations of significance are CT Ratio (Current Rating) PT Ratio (voltage Rating) VA (Burden Load) Accuracy or Precision construction Features Functional features of the meter ie, whether it is multifunctional or normal meter. To measure energy, three other quantities have to be known: voltage, current and time. The voltage and current delivered by a generator to a load are measured relative to time with the aid of a microcontroller, which consists of an analogue-to-digital (A-D) convertor with switched inputs and a timer. The current is measured by passing it through a shunt resistor that converts it into a directly proportional voltage. The resistor is shown for clarity only: in practice it is part of the meter. The range of input voltages is determined by a series resistor that also provides current are applied to the controller, they are amplified and rectified. Their polarity is determined by a comparator whose output is linked to a digital input of the controller. This arrangement makes it appear as if the A-D conversion were upgraded from eight to nine bits.
Cost Estimation
Plant Capacity 60 Nos./Day
Land & Building (Area 2 Canal) Rs. 4 Cr.
Plant & Machinery Rs. 33 Lacs
W.C. for 1 Months Rs. 37 Lacs
Total Capital Investment Rs. 4.88 Cr.
Rate of Return 22%
Break Even Point 56%
Note: ITI can modify the Capacity and Project Cost based on your requirement.
Contents of the Project Reports
Introduction
Uses and Applications
Properties
Market Position
Present Manufacturers
Detailed Process of Manufacture
Formulations
B.I.S. Specifications
Process Flow Sheet Diagram, Plant Layout,
Cost Economics with Profitability Analysis
Capacity
Land & Building Requirements with Rates
List & Details of Plant and Machinery with their Costs
Raw Materials Details/List and Costs
Power & Water Requirements
Labour/Staff Requirements
Utilities and Overheads
Total Capital Investment
Turnover
Cost of Production
Break Even Point
Profitability
Land Man Ratio
Suppliers of Plant & Machineries and Raw Materials
Cash Flow Statement
Repayment Schedule
Interest Chart
Depreciation Chart
Projected Balance Sheet for 5 Years etc.