Project Report on Aluminium Beverage Cans Eiri1037

Most metals beverage cans are made of Aluminum an empty Aluminum Can weights Approximately 15 gram. Today All Aluminum can are  of the  two piece version with Integral wall and base, which  Avoids the  necessary for an Internal lacquer repair strip, Permits  all round decoration, and has an Inherent higher  integrity than  the welded  scam can. The separate lid is Attached by double  seaming immediately  after  the can has been  filled. Beverage  cans  are produced by drawing a cup from plain Aluminum sheet and  thinning or  ironing,  the  walls  to one third  of  the  base  thickness. Aluminum  is  ideally  suited to  fulfill  both  formability  and lacquer  adhesion  requirements. Standard  Sizes.  100ml,  500ml, 473ml,  440ml,  375ml, 355ml, 350ml, 3330ml, 237ml, 200ml,  Cans comes in varying heights and diameters to encompass the  range of capacities  currently in use, however the diameters are usually one of the two standard sizes, Canada the United States. Australia and New Zealand almost universally use a diameter slightly  in  Excess of 65mm. This size is  almost  universal  in these  countries  for soft drinks, beers and  ready  mixed  sprit drinks.  European countries mostly use a much narrower  size  of 52mm  for  soft drinks and some beers.  On  Practical  difficulty brought  by  these  two  different standard sizes  is  that  cans manufactured  in Europe (whose use smaller size) and exported  to the  US  or Australia (whose use the larger size)  often  present their owners with cup holders  that are incapable of handing must drinks in those countries.